Photo 5 On the back of the piece of cardboard, the chips, resistors, and LED's, were wired directly to the pins of the printer connector (which had the cover removed). This method speeds up wiring, since the pins are clearly identified, versus, using color codes to navigate the 25 wires! A simple, clean manufactured circuit board could be made in quantity for a few dollars, and eliminate this hand-wiring!
1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16
_______________________________________________
If you CANNOT see the toolbar with the MENU on the LEFT
side of this page, using a home computer or laptop, or, if you
are on a CELL phone and cannot see or click on the menu at
the top of the screen, then you can, as an option, CLICK HERE
go to the correct HOME PAGE, www.kidbots.com
MATH CLICK HERE
HOW TO CLICK HERE
TYPES CLICK HERE
ROBOT BASIC CLICK HERE
IMAGES CLICK HERE
Robot Cartoons CLICK HERE
Robots CLICK HERE
About kidbots CLICK HERE
______________________________
Kidbots.com is a Free website, with Free
information, on how to USE Free computers
to make Free ROBOT controllers and
Free ROBOTS for kids.